O2 sensor

[Diehl, Jeffrey]

Great!

Does anyone have any physical specs for this device? I have a threaded bung
that is 17mm with a 1.5mm thread pitch.  I've been told it's "the standard"
bung for o2 sensors....

Will this work?

Thanx,
Mike Diehl.

-----Original Message-----
From: Rod Hiorns
To: jdiehl at sandia.gov
Sent: 10/15/2001 12:12 PM
Subject: RE: O2 sensor

Try www.thepatrsbin.com should be ~$117 with free ground shipping.
It's a Bosch relabeled part but in the box is the same 5 wire NTK.
Look for the 1992 3 door Honda Civic 1.5l Vx (VTEC) oxygen sensor.
This is for the federal car, not California emissions.
Cheers,
Rod

-----Original Message-----
From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
Behalf Of Diehl, Jeffrey
Sent: Monday, October 15, 2001 10:32 AM
To: 'diy_efi at diy-efi.org'
Subject: O2 sensor


My quest for the WB O2 sensor continues...

I went to AutoZone the other day and asked for an O2 sensor for a 92
Civic
1.5L.  They had two listed, one for $69.99 and one for $219.99.  I
figured I
needed the high-dollar one...

They brought it out and it had 4 wires coming out of it.  I was told
that
the WB used in the diy-wb had 5 wires.  Is this true?  I'm hoping this
is
the right one, because I was able to get threaded bungs that fit it.

I need to make sure this is the right one because I have to modify my
header
to accept it; it sure would be a bummer to modify the header and find
out
that the part doesn't fit!  Steel is not very forgiving.

BTW, where is the best price for this part?  $219 is steap.  Initially,
I
only need one, but plans are that we will put one on each of 4 cyls. and
tune each independantly.

Thanx,
Mike Diehl.

------------------------------------------------------------------------
----
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
in the body of a message (not the subject) to
majordomo at lists.diy-efi.org



----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org