Pics of pistons

[Tom Sharpe]

Dart block, 4340 crank, Dyers rods, JE pistons, CA rings, C77 bearings,
$100/gaskets, $300/maching, balance, and a flat lobe from re-using my old cam
and lifters.  WAAAAAAAAH !!

Greg Hermann wrote:

> OR--rather than learn to do a bit of research before spending money, so
> that I won't be upset with myself, I'd rather refuse to admit that I made a
> dorkomatic choice, and wasted a bunch of my money.
>
> So--I'll just b*tch at the guys who tell me the facts! (Which were
> generally learned from ugly experience !!)
>
> And--when the sumbitch comes apart, I'll have wasted even MORE money than I
> did on the pistons, so THEN I'll behave even MORE rudely! WAAAAAAAAH !!
>
> Greg
>
> At 7:38 PM 10/14/99, Bruce wrote:
> >But, but, but, you answered a guestion to Tom,   that might be grounds for
> >being b*tched at.
> >Gives a new meaning to reversion, and what happens at overlap, ehh..
> >Bruce
> >
>
> >From: "Programmer" <nwester at eidnet.org>
> >Subject: Re: Pics of pistons
> >> From the second pic, it just looks to me like aluminum from the ring land
> >> that's
> >> marked that piston--not detonation marks...it'll bounce around and can
> >mark
> >> up
> >> every piston in a single plane intake.
> >> Lyndon
>
> ----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org