WB 02 Boards- E85

[Ray Drouillard]

Regular gasoline creates water when it burns too.  Are you worried about
water getting through unburned when starting the engine?


Ray


----- Original Message -----
From: "Bruce" <nacelp at bright.net>
To: <diy_efi at diy-efi.org>
Sent: Monday, October 18, 1999 11:00 AM
Subject: Re: WB 02 Boards- E85


>
> Sounds like trouble waiting to happen.
> Trouble with any fuels running Alky is water being in the fuel.  When they
> were using gasohol around here, at times was as high as 12% water.
Running
> that full time, *just might* cause issues with a higher level of
> condensation when sitting.  Water droplets and heated O2 sensors might not
> be a good thing.
>    The WB has been used with conventional gasoline, and beyond that your
on
> your own.  Have you thought to call Honda and see if their car using the
WB
> is safe on that fuel?.
> Bruce
>
>
>
> ----- Original Message -----
> From: "Santi Udomkesmalee" <scathontiphat at hotmail.com>
> To: <diy_efi at diy-efi.org>
> Sent: Thursday, October 18, 2001 8:45 AM
> Subject: Re: WB 02 Boards- E85
>
>
> > E85 is an alternative fuel.  85% ethanol, 15%gasoline
> >
> >
> > >From: "Bruce" <nacelp at bright.net>
> > >Reply-To: diy_efi at diy-efi.org
> > >To: <diy_efi at diy-efi.org>
> > >Subject: Re: WB 02 Boards- E85
> > >Date: Sun, 17 Oct 1999 21:56:36 -0400
> > >
> > >
> > >Dunno how compatible the sensor is with E85, or for that matter what
your
> > >calling E85.  Stoic is stoic., the AFR will vary to reach that
depending
> on
> > >fuel chemistry,  a Gasoline AFR of richer then 10 is beyond this.
> > >   Remember this is a non lab grade DIY devise.  If you want to get
into
> > >other stuff then use the appropriate test tools.
> > >   This is meant as a DIY WB, non lab grade, you want more then that
then
> > >get
> > >the check book out and thing serious money.
> > >Bruce
> > >
> > >
> > >
> > >----- Original Message -----
> > >From: "Santi Udomkesmalee" <scathontiphat at hotmail.com>
> > >To: <diy_efi at diy-efi.org>
> > >Sent: Wednesday, October 17, 2001 9:48 PM
> > >Subject: WB 02 Boards- E85
> > >
> > >
> > > > If I got one of these boards, how would I calibrate it for use with
> > > > E85(stoich: 9.85:1) instead of gasoline?
> > > >
> > > > -santi
> > > >
> > > > _________________________________________________________________
> > > > Get your FREE download of MSN Explorer at
> > >http://explorer.msn.com/intl.asp
> > > >
> > > >
> >
>
>--------------------------------------------------------------------------
> > >--
> > > > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> > >quotes)
> > > > in the body of a message (not the subject) to
> > >majordomo at lists.diy-efi.org
> > > >
> > > >
> > >
> >
>
>---------------------------------------------------------------------------
> -
> > >To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> > >quotes)
> > >in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> > >
> >
> >
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at
http://explorer.msn.com/intl.asp
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org