Fuel injector angle and timing

[Santi Udomkesmalee]

just got to go through them one by one... can't remember which ones I've 
read so far that have been useful


>From: Igor Dorrestijn <I.K.Dorrestijn at its.tudelft.nl>
>Reply-To: diy_efi at diy-efi.org
>To: diy_efi at diy-efi.org
>Subject: Re: Fuel injector angle and timing
>Date: Thu, 18 Oct 2001 19:25:39 +0200
>
>Hi Santi,
>
>Sorry to bother you, but which archives are you reading? I just subscribed
>to the list and am looking for the same information, but am having a hard
>time finding any useful archive material. The WWW style archive on the
>diy-efi site only has messages from 1994 and the text version is extremely
>unwieldy. Is there a thread index somewhere?
>Thanks in advance,
>
>Igor Dorrestijn
>
>
> > just ignore me... I'm really bad at looking through the archives...
>there's
> > plenty of stuff on sequential timing.  Once I read it all, I'll be back
>with
> > more questions.
> >
> > -santi
> >
> >
> > >From: Shannen Durphey <shannen at grolen.com>
> > >Reply-To: diy_efi at diy-efi.org
> > >To: diy_efi at diy-efi.org
> > >Subject: Re: Fuel injector angle and timing
> > >Date: Thu, 18 Oct 2001 11:05:36 -0400
> > >
> > >You really need to look through the archives and around the ftp site.
> > >
> > >ftp://ftp.diy-efi.org/incoming/
> > >
> > >DIS+inj_timing1.gif
> > >DIS+inj_timing1a.gif
> > >DIS+inj_timing2.gif
> > >DIS+inj_timing2a.gif
> > >
> > >Santi Udomkesmalee wrote:
> > > >
> > > > I was wondering if you guys could give me some info, or point me in
>the
> > > > right direction concerning fuel injector placement and timing.  I 
>need
> > >to
> > > > decide where and at what angle to place our fuel injectors.  I've
>heard
> > > > several theories on this (ie pointing it upstream, aiming directly 
>at
> > >the
> > > > valve, etc...) but no real numbers, and I'd like to get some good
> > >reading
> > > > done on this.  Also, I need to decide on injector timing.  So if you
> > >guys
> > > > have any suggestions, or suggestions for reading, I'd be glad to 
>take
> > >them.
> > > > Just in case it helps, the engine is a 600cc DOHC motorcycle engine
> > >that's
> > > > turbocharged, and runs on E85(85% ethanol).  Thanks
> > > >
> > > > -santi
> > > >
> > > > _________________________________________________________________
> > > > Get your FREE download of MSN Explorer at
> > >http://explorer.msn.com/intl.asp
> > > >
> > > >
> >
> >---------------------------------------------------------------------------
>-
> > > > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> > >quotes)
> > > > in the body of a message (not the subject) to
> > >majordomo at lists.diy-efi.org
> >
> >---------------------------------------------------------------------------
>-
> > >To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> > >quotes)
> > >in the body of a message (not the subject) to 
>majordomo at lists.diy-efi.org
> > >
> >
> >
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at 
>http://explorer.msn.com/intl.asp
> >
> > 
>--------------------------------------------------------------------------
>--
> > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
>quotes)
> > in the body of a message (not the subject) to 
>majordomo at lists.diy-efi.org
> >
>
>----------------------------------------------------------------------------
>To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the 
>quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>


_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org