diy o2 and tpi question

[Don DRI05 Ricciardiello]

Would this work? especially the bit that talks about "Non Standard Voltage
Input"

http://kitsrus.com/projects/k127.pdf

Cheers

Don







From: steve ravet <sravet at arm.com>@diy-efi.org on 18/10/2001 10:30 EST

Please respond to diy_efi at diy-efi.org

Sent by:  owner-diy_efi at diy-efi.org


To:   diy_efi at diy-efi.org
cc:
Subject:  Re: diy o2 and tpi question


The output of the WBO2 board is a voltage from about 1.5 volts to 4.0
volts.  The output voltage is an indication of the A/F ratio.  There's a
table that explains it here:

ftp://diy-efi.org/pub/diy_efi/project_files/diy_wb1/v_out.txt

You can connect your voltmeter to the output and use the table to see
your AFR.  There are 2 display projects going on, an LCD that provides a
numeric readout and an LED project that uses a range of LEDs to indicate
AFR.  These can be connected to the WBO2 circuit for a more readable
output.

--steve

chris abreu wrote:
>
> Hi guys,
>
> sorry if you have answered this question a million times already, but i
> haven't seen a clear answer in the past emails.  How do you read the
output
> of the system.  I dont have too much electronics knowledge and therefore
> looking at the layout doesn't help me much. I don't see an LCD display on
> the parts list or numerous LED's.  Can somebody give me an answer in
terms
> an ME would understand.  The only experience I have with anything even
> close to Electrical work is burning proms  for TPI and installing TPI.

--steve

--
Steve Ravet
steve.ravet at arm.com
ARM,Inc.
www.arm.com
----------------------------------------------------------------------------

To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org