Thermal coatings

[Shannen Durphey]

Interesting.  Well, they mentioned a specific company which sold industrial
equipment to ask about prices for application tools.  Go figure.

No mention about the solvent base.  I take it you don't use an open flame gas
oven. : )  They also wanted the shop I was buying through to become a dealer.  

Shannen

Dave Williams wrote:
> -> I learned that the equipment required to apply them
> -> is quite expensive.
> 
>  I don't know about that... I use the "industrial" or "professional"
> Tech Line products with the same sandblaster and air brush I used for
> their DFL-2 product.  They wanted me (circa 1998) to become a Tech Line
> dealer before they'd sell me the stuff.  Their explanation was the pro
> coatings are solvent-based, and they were worried about complaints or
> liability issues with schmucks baking solvents in their home oven.  So I
> filled out a request to become a dealer and gave them my credit card
> number, and they sent me big quart cans of stuff, some of which I'm
> still using.
> 
>  There are several pictures of parts I've coated on my web site.
> 
> ==dave.williams at chaos.lrk.ar.us======================================
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org