WB Display.

[Bruce]

Might be a Westach (?) unit.
they do lots of custom meters.
Bruce



----- Original Message -----
From: "Enzo Iadevaia" <enzo5555 at yahoo.com>
To: <diy_efi at diy-efi.org>
Sent: Monday, October 22, 2001 8:04 PM
Subject: Re: WB Display.


> I have seen that before.. Some tuner I know is using something that most
be
> DIY..
> he's using a honda 02 sensor because i noticed the connector on it. and
he's
> also using an analog meter with
> the approiate a/f ratio written on the meter. he won't tell me what it is
> but to me it looks like he's using something very similiar to the
diy-wb02.
> Maybe one of the earlier one's produced because he's had it for about 5
> years now. i wanted to do the same but i had a hard time finding an analog
> meter with a fine scale so that you can precisely read it. So yes it
should
> work fine but i can't seem to find a cheap analog meter to use.
>
>
>
>
> > How about a high impedance analog meter with the scale customized to
read
> A/F
> > ratio - put on a coloured scale indicating green in the "go "zones, and
> red in
> > the "no go" zones, with actual ratio printed as well?
> >
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
>
>
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org