MAF experiments

[Dylan Johnson]

If I follow what you did you might want to get some aluminum honeycomb
material. It comes in a variety of thickness and cell sizes. It should work
well for straightening out the turbulence.
  

Stopped a hobby shop and bought some .005" brass sheeting, then built an X
(thou, 90d), that was 2.5" wide, and tall, and 2" long.  This was inserted
in the up pipe pre MAF to try and reduce the turbulence
  
  
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org