Water Injection

[Hugh Keir]

Dave,

Do you have a link for the water injection list?

Hugh

----- Original Message -----
From: "David Harris" <dharris2112 at yahoo.com>
To: <diy_efi at diy-efi.org>
Sent: Wednesday, October 24, 2001 3:59 AM
Subject: WB O2 Display, WI


> WB O2 Display:
>
> Maybe this is a stupid question since I'm new to the
> list but why not simply use a microcontroller?
> Microchip and Atmel make some pretty cheap (less than
> $20) and capable micros (you could make an Atmel
> programmer for less than $10). You could put the curve
> in a lookup table and display A/F directly. You could
> also output a traditional 0-1V for the stock ECU and
> replace the narrowband O2 completely...
>
> This is my plan for one of the weekends this winter.
> If no one else has designed something by then, I'll
> upload it to the server...
>
> Water Injection:
>
> Many of us on the WI list have been using the
> ShureFlow with no issues (I personally don't as I have
> an Aquamist 1S). I believe that most people use the
> Aquamist 0.7mm to 0.9mm jets with that pump. These are
> people running 25 to 30PSI for dragracing and 20 to
> 25PSI for road racing. Is there anyone on the list
> running more boost than this? Just curious...
>
> Pretty cool list by the way. It's pretty prolific ;-)
>
> Dave
> 91 GVR4's #619 & #849
>
>
>
> =====
> Drive Hard--Look Good--Be Loud--Get Some
>
> __________________________________________________
> Do You Yahoo!?
> Make a great connection at Yahoo! Personals.
> http://personals.yahoo.com
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>



----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org