injector staging

[bill.shurvinton at nokia.com]

Bruce, Greg, Axel,

Thanks for the replies. I will have a study of the Megasquirt code over
the weekend and see what the easiest strategy is to implement. I'll let
you know how it goes.

In case anyone has an interested in EFI SW for the wierd (and
potentially uneconomical) rotary this is my current strategy, currently
mainly based on coding skill and patience level.

Phase 1: Build 2 Megasquirts, one per rotor to control injectors. With a
few SW mods I can do staged injection without any HW mods. This is much
easier than using one unit, as I can have a TDC signal for each rotor as
the interupt and don't have to code for a CAS

Phase 2: See if I can add ignition functionality. This could be fun due
to the split ignition timing issues with a rotary ( 2 plugs per rotor,
with variable timing between them). Let's just say I can see myself
running off the dizzy for some time to come. 

Rgds

Bill
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org