injector staging

[Bruce]

Might think of running two GM boxes to do that.  Rather then try and
develope an ecm and EFI at the same time.
Thought the second plug was an emission deal (least was when training
there).
Bruce


From: <bill.shurvinton at nokia.com>
Subject: RE: injector staging
> Bruce, Greg, Axel,
> Thanks for the replies. I will have a study of the Megasquirt code over
> the weekend and see what the easiest strategy is to implement. I'll let
> you know how it goes.
> In case anyone has an interested in EFI SW for the wierd (and
> potentially uneconomical) rotary this is my current strategy, currently
> mainly based on coding skill and patience level.
> Phase 1: Build 2 Megasquirts, one per rotor to control injectors. With a
> few SW mods I can do staged injection without any HW mods. This is much
> easier than using one unit, as I can have a TDC signal for each rotor as
> the interupt and don't have to code for a CAS
> Phase 2: See if I can add ignition functionality. This could be fun due
> to the split ignition timing issues with a rotary ( 2 plugs per rotor,
> with variable timing between them). Let's just say I can see myself
> running off the dizzy for some time to come.
> Rgds
> Bill


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org