was injector staging: now Buick V6

Jim Blackwood jblackwood5 at home.com
Mon Oct 29 19:20:35 GMT 2001


I heard the housings begin to warp around 300 and higher. Anything to that?

-----Original Message-----
From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
Behalf Of Bruce
Sent: Saturday, October 30, 1999 11:16 AM
To: diy_efi at diy-efi.org
Subject: Re: was injector staging: now Buick V6



Look up a 4 rotor, and be sure to sit down first.

I can run at about 500 in my street trim GN.  Lots of guys doing about the
same thing, with less work then I have in mine.  $2K takes care of
injectors, a Turbo, better electronics, and money left for tires, etc., on a
GN.
Bruce

From: <bill.shurvinton at nokia.com>
Subject: RE: was injector staging: now Buick V6
> 12A turbo 360Ibs!!! wierd. AFAIK the 12As were around the 200 mark, at
> least in NA form. I will do some research at home tonight.
> I can believe that the 20B is over 300, but that is a different beast.
> As for life, splash out on ceramic seals and the engine lasts for ages.
> I have heared of 3 seasons racing on a 500BHP motor with no rebuilds.
> Mind you at $2k for a set of seals, they ought to be good.
> Bill

> From: ext Bruce [mailto:nacelp at bright.net]
> Subject: Re: was injector staging: now Buick V6
> Rotary 12A with turbo, 360 lbs.
> B


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Diy_efi mailing list