One more WB

[Bruce]

This is like a good thing!.
So now we have to wait in suspense for almost 24 hrs?.  <sigh>.
Interesting data on the LN431
Thanks
Bruce



From: "Scot Sealander" <Sealand at clarityconnect.com>
Subject: One more WB
> One more DIY wide-band that works, at least in free air it reads 3.88
> volts.  It did have a problem at first power on.  I powered it up the
> first time without the sensor hooked up.  The "sensor warm" LED
> immediately came on, but the voltage regulator was only putting out 3.42
> volts into an open circuit.  Investigation showed that the LM431 in the
> voltage regulator circuit was bad as installed.  Replaced the LM431, and
> all is well.
> The code has been added to the ECM, it re-assembles w/o error, so it
> will probably go in the car tommorrow after work... Looking foward to
> see what it does!
> Scot Sealander

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org