pipe

[Programmer]

Oops...after seeing it, there wouldn't be a problem.
Lyndon.
----- Original Message -----
From: "Bruce" <nacelp at bright.net>
To: <diy_efi at diy-efi.org>
Sent: Tuesday, September 05, 2000 7:40 AM
Subject: Re: Pictures of DIY-WB


>
> I keep having kids ask to go ahead and shoot flames.
> Bruce
>
>
> From: "rr" <rrauscher at nni.com>
> Subject: Re: Pictures of DIY-WB
> > This is great news Mark. The stinger looks neat also. Can
> > see why you get looks & chuckling. I had one guy ask who
> > I was trying to email when he saw the cable taped to the
> > side of the car leading into the back window.
> > BobR.
>
> > On Wed, 5 Sep 2001 00:10:54 -0400
> >  "Mark S. Riley" <turbotuneusltd at triad.rr.com> wrote:
> > > I've posted 3 pictures I took this afternoon of the
> > > DIY-WB next to the
> > > Horiba.
> > > http://www.turbotuneusltd.nstemp.com/wideband/
> > > Shows the 2 bonger tail pipe stinger. Should have seen
> > > the kids laughing at
> > > it when we went to lunch.
> > > From the little bit I been able to drive it today, it's a
> > > very close match
> > > to the Horiba. The Horiba is displaying down to the
> > > hundreth of an air fuel
> > > ratio. This is much finer than the hundreths of a volt
> > > shown on the meter.
> > > But looking at the voltage to a/f chart so far everything
> > > matches very well.
> > > Warm up time is about 35-40 seconds. Just a little bit
> > > longer than the
> > > Horiba. I added 2 led's to show power for the 2 power
> > > leads.
> > > later, Mark
> > >
> >
>
> --------------------------------------------------------------------------
> --
>
> --------------------------------------------------------------------------
> --
> > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> quotes)
> > in the body of a message (not the subject) to
majordomo at lists.diy-efi.org
> >
> >
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org