Bolt on Throttlebody suggestions

[Lasse Langwadt Christensen]

Ron Schroeder wrote:
> 
> Hi Alan,
> 
> Fancy meeting you here ;)   For my first EFI on the Pinz, I just used the
> Zenith carbs with the idle cut-off solenoids unenergized and the accel.
> pumps disabled as throttle bodies.  I mounted the injectors (Bosch, about
> 19lb/hr) to bosses that I welded to the runners on the stock manifolds.  I
> am using a home brew ECU that at least works better than carbs but I want
> to go with a re-maped 727.
> 
snip

heres another example, using weber mounted upsidedown, 
http://www.hms.dk/club-race/fartstrup_projektet.htm

It's inn danish so here's a direct link to the picture:
http://fermi.ruc.dk/s?7968,1024,768

-Lasse
-- Lasse Langwadt Christensen, 
-- A Dane in Phoenix, Arizona
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org