interesting project, efi needed

[Wing Gee]

maybe SDS or electromotive or autronic.. keep in mind.. those are really
expensive stuff. the SDS is the cheapest...

Wing
----- Original Message -----
From: "Matt Beaubien" <mrbeau0 at yahoo.com>
To: <diy_efi at diy-efi.org>
Cc: <antiriced at yahoo.com>
Sent: Tuesday, September 25, 2001 12:44 PM
Subject: Re: interesting project, efi needed


> Tom,
>
> Have you looked into Motec or EFI Technologies in
> Torrance?  I'm not sure who else does high-end
> systems.  Maybe Pectel?  Anyone else with suggestions?
>
> Sounds like a neat project...
>
> Matt.
>
> --- Tom <antiriced at yahoo.com> wrote:
> > looking for an EFi system to run a project car I
> > came across.. Ran some
> > numbers and need something that will handle fuel and
> > ignition on an 8
> > cylinder up to ~14,000 rpm. I think 120lb/hr
> > injectors will provide
> > sufficient safety margins when running MeOH... Also
> > need those injectors to
> > idle nicely @ 1.5ms pw.
> >
> > say, how much advance would a fairly oversquare
> > engine running 14k rpm on
> > methanol @ 5psi boost with relatively high static
> > compression require
> > anyway? Is there an upgrade for the Megasquirt
> > planned that would support
> > this application?
> >
> > :-)
> > -tom
> >
> >
> >
> _________________________________________________________
> > Do You Yahoo!?
> > Get your free @yahoo.com address at
> > http://mail.yahoo.com
> >
> >
> --------------------------------------------------------------------------
--
> > To unsubscribe from diy_efi, send "unsubscribe
> > diy_efi" (without the quotes)
> > in the body of a message (not the subject) to
> > majordomo at lists.diy-efi.org
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Get email alerts & NEW webcam video instant messaging with Yahoo!
Messenger. http://im.yahoo.com
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org