ECU for 14k rpm V8

[Axel Rietschin]

----- Original Message -----
From: "Chris Waltham" <chris at harvestroad.com>
To: <diy_efi at diy-efi.org>
Sent: Friday, September 28, 2001 04:25
Subject: Re: ECU for 14k rpm V8


>
>
> >More like 1.3 - 1.4 with 32mm GpN restrictors and maybe 1.8 and change
with
> >34mm GpA/WRC restrictors. Output is around 300hp.
>
> Possum Bourne's car (2000 Impreza WRC) that he campaigns in the Australian
> Rally Championship runs (he said) 3 or so bar.. not sure if that's 3 bar
> above atmosphere, or including it..
>
> They all make stupendous amounts of torque, though, usually > 450 ft/lb.
> It's amusing - the 2L turbo rally cars make more torque than the V8
Supercars
> we run here (limited to 5L, pushrod 2V/cyl setups).

Yes. They accelerate quicker too :-)

>
> My rally car runs a 32mm restrictor (a Pulsar GTi-R), never had it on a
dyno
> to see what sort of power it makes though. Not yet, at least..

32mm will give around 250-260hp max.

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org