DSM turbo efi question

[Stephen Andersen]

1G turbo talons were 450cc/min, 2g's I think use 390cc/min
injectors.

I don't recall the pressure that the injectors are rated
at however...

Steve

Stephen M. Andersen, P.E.                              (302) 326-6405
Technical Director                                    FAX  (302) 326-6401
AdvanTek International, LLC                     Cell   (302) 547-9842
56 Read's Way                               andersen at Advan-Tek.com
New Castle, DE 19720


> -----Original Message-----
> From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
> Behalf Of ECMnut at aol.com
> Sent: Saturday, September 29, 2001 1:21 PM
> To: diy_efi at diy-efi.org
> Subject: DSM turbo efi question
> 
> 
> 
> Does anyone know what the stock injectors flow
> in a 1Gen or 2gen turbo talon?  Were they the same for both 
> generations?
> TIA,
> Mike V
> --------------------------------------------------------------
> --------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" 
> (without the quotes)
> in the body of a message (not the subject) to 
> majordomo at lists.diy-efi.org
> 
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org