DSM turbo efi question

[Shannen Durphey]

Just out of curiosity, what brand of injectors are these?
Shannen

Stephen Andersen wrote:
> 
> 1G turbo talons were 450cc/min, 2g's I think use 390cc/min
> injectors.
> 
> I don't recall the pressure that the injectors are rated
> at however...
> 
> Steve
> 
> Stephen M. Andersen, P.E.                              (302) 326-6405
> Technical Director                                    FAX  (302) 326-6401
> AdvanTek International, LLC                     Cell   (302) 547-9842
> 56 Read's Way                               andersen at Advan-Tek.com
> New Castle, DE 19720
> 
> > -----Original Message-----
> > From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
> > Behalf Of ECMnut at aol.com
> > Sent: Saturday, September 29, 2001 1:21 PM
> > To: diy_efi at diy-efi.org
> > Subject: DSM turbo efi question
> >
> >
> >
> > Does anyone know what the stock injectors flow
> > in a 1Gen or 2gen turbo talon?  Were they the same for both
> > generations?
> > TIA,
> > Mike V
> > --------------------------------------------------------------
> > --------------
> > To unsubscribe from diy_efi, send "unsubscribe diy_efi"
> > (without the quotes)
> > in the body of a message (not the subject) to
> > majordomo at lists.diy-efi.org
> >
> ----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org