MAP sensor (Cheap 3-bar!)

[Steve Spiers]

GREAT! thanks

Will they send one to me in New Zealand?

Steve

rob files wrote:

> Hi all,
>
> A friend passed this to me;
>
> www.gmpartsdirect.com
> P/N 16040749 $49
>
> The Wells 2-bar from Autozone is $27 if anybody is looking for one of those.
>
> -Rob
>
> >From: "Eck, Joel" <Joel.Eck at COMPAQ.com>
> >Reply-To: diy_efi at diy-efi.org
> >To: <diy_efi at diy-efi.org>
> >Subject: RE: MAP sensor
> >Date: Thu, 11 Apr 2002 11:25:40 -0500
> >
> >I don't know where they got the p/n from, but since they referenced Pep
> >Boys later on in the article, I am thinking that it may be a p/n from that
> >store. I tried to search on it, but the only hits for that p/n and map came
> >up were the hondata page and some korean site, couldn't read it because I
> >didn't have korean acrobat support installed....
> >
> >-----Original Message-----
> >From: Steve Spiers [mailto:s.spiers at xtra.co.nz]
> >Sent: Thursday, April 11, 2002 4:51 AM
> >To: diy_efi at diy-efi.org
> >Subject: Re: MAP sensor
> >
> >
> >Hi, interesting site. The part number there is totally different. Is it the
> >same 3
> >bar GM sensor as listed in the GM_ECM page? has anyone elce purchased one
> >of
> >these?
> >
> >Steve
> >
> >"Eck, Joel" wrote:
> >
> > > try looking here : www.hondata.com/3barinstall.html
> > >
> > > -----Original Message-----
> > > From: Steve Spiers [mailto:s.spiers at xtra.co.nz]
> > > Sent: Wednesday, April 10, 2002 5:51 AM
> > > To: diy_efi at diy-efi.org
> > > Subject: Re: MAP sensor
> > >
> > > Thanks for the Info. I tried everyone I know but no one could use that
> >number.
> > > Maybe it is only good in the US. Anyway I got a 2nd hand ST185 GT4
> >Celica
> > > sensor. It reads to 18psi. I will be able to use that for now but will
> >have to
> > > find a 3 bar eventually
> > >
> > > Steve
> > >
> > > Steve Ravet wrote:
> > >
> > > > There is info on GM map sensors on www.diy-efi.org/gmecm, click
> > > > component info.  These mount under the hood, send an electrical signal
> > > > back to the ECM.
> > > >
> > > > --steve
> > > >
> > > > Steve Spiers wrote:
> > > >
> > > > > Ive been looking for an afordable MAP sensor for my injector
> >controller
> > > > > project. Ive been looking at OEM parts off different cars. I notice
> >that
> > > > > most Aftermarket EMSs have the MAP sensor built into the ECU. I
> >would
> > > > > assume the electronics would be built into the board somewhere, but
> > > > > there must be a mechanical to electrical transducer there somewhere.
> >Are
> > > > > transducers like this avaiable? I could do it this way.
> > > >
> > > > --
> > > > Steve Ravet
> > > > steve.ravet at arm.com
> > > > ARM,Inc.
> > > > www.arm.com
> > > >
> > > > ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
> > > >
> >----------------------------------------------------------------------------
> > > > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> >quotes)
> > > > in the body of a message (not the subject) to
> >majordomo at lists.diy-efi.org
> > >
> > >
> >----------------------------------------------------------------------------
> > > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> >quotes)
> > > in the body of a message (not the subject) to
> >majordomo at lists.diy-efi.org
> > >
> > >
> >----------------------------------------------------------------------------
> > > To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> >quotes)
> > > in the body of a message (not the subject) to
> >majordomo at lists.diy-efi.org
> >
> >
> >----------------------------------------------------------------------------
> >To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> >quotes)
> >in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> >
> >----------------------------------------------------------------------------
> >To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
> >quotes)
> >in the body of a message (not the subject) to majordomo at lists.diy-efi.org
> >
>
> _________________________________________________________________
> Chat with friends online, try MSN Messenger: http://messenger.msn.com
>
> ----------------------------------------------------------------------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org


----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org