[Diy_efi] Accel GEN 6 and blowe

[Phil]

Noel-

By the looks of the power level you have achieved, it seems as if you
already have the combination dialed in, yes? What are the issues with the
engine when cold or at startup?

If I recall correctly, you should have the 25lb./hr. Ford injectors that
came with the kit, yes?

-Phil

----- Original Message -----
From: "Noel Strauss" <roots66 at flexoink.com>
To: <diy_efi at diy-efi.org>
Sent: Tuesday, December 24, 2002 12:36 AM
Subject: Re: [Diy_efi] Accel GEN 6 and blowe


> Phil
> Please check out my website.
http://www.corvetteforum.net/classics/noelga/
> We have only run the motor on dyno.
> Thanks
> Noel
> ----- Original Message -----
> From: "Phil" <rjp at teknology.net>
> To: <diy_efi at diy-efi.org>
> Sent: Monday, December 23, 2002 8:42 PM
> Subject: Re: [Diy_efi] Accel GEN 6 and blowe
>
>
> > Noel-
> >
> > I have experience with this design. Define your powertrain combination
and
> > vehicle that it's installed in clearer.
> >
> > -Phil
> >
> > ----- Original Message -----
> > From: "Noel Strauss" <roots66 at flexoink.com>
> > To: <diy_efi at diy-efi.org>
> > Sent: Wednesday, December 18, 2002 11:11 PM
> > Subject: [Diy_efi] Accel GEN 6 and blowe
> >
> >
> >
> > Does anyone have experience with setting up the EFI
> >
> > on a 16 injector BDS bugcatcher? Need help with base fuel map and cold
> > start.
> >
> >
> >
> > _______________________________________________
> > Diy_efi mailing list
> > Diy_efi at diy-efi.org
> > http://www.diy-efi.org/mailman/listinfo/diy_efi
>
>
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://www.diy-efi.org/mailman/listinfo/diy_efi
>


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi