[Diy_efi] Accel GEN 6 and blowe

[Noel Strauss]

Phil
When we were setting it up on the dyno
we did not have enough time to let the cool enough
to set cold start idle. Do you know a ball park setup or starting place for
startup idle?
Injectors are 30lb./hr. Ford.
Noel
----- Original Message -----
From: "Phil" <rjp at teknology.net>
To: <diy_efi at diy-efi.org>
Sent: Tuesday, December 24, 2002 7:47 AM
Subject: Re: [Diy_efi] Accel GEN 6 and blowe


> Noel-
>
> By the looks of the power level you have achieved, it seems as if you
> already have the combination dialed in, yes? What are the issues with the
> engine when cold or at startup?
>
> If I recall correctly, you should have the 25lb./hr. Ford injectors that
> came with the kit, yes?
>
> -Phil
>
> ----- Original Message -----
> From: "Noel Strauss" <roots66 at flexoink.com>
> To: <diy_efi at diy-efi.org>
> Sent: Tuesday, December 24, 2002 12:36 AM
> Subject: Re: [Diy_efi] Accel GEN 6 and blowe
>
>
> > Phil
> > Please check out my website.
> http://www.corvetteforum.net/classics/noelga/
> > We have only run the motor on dyno.
> > Thanks
> > Noel
> > ----- Original Message -----
> > From: "Phil" <rjp at teknology.net>
> > To: <diy_efi at diy-efi.org>
> > Sent: Monday, December 23, 2002 8:42 PM
> > Subject: Re: [Diy_efi] Accel GEN 6 and blowe
> >
> >
> > > Noel-
> > >
> > > I have experience with this design. Define your powertrain combination
> and
> > > vehicle that it's installed in clearer.
> > >
> > > -Phil
> > >
> > > ----- Original Message -----
> > > From: "Noel Strauss" <roots66 at flexoink.com>
> > > To: <diy_efi at diy-efi.org>
> > > Sent: Wednesday, December 18, 2002 11:11 PM
> > > Subject: [Diy_efi] Accel GEN 6 and blowe
> > >
> > >
> > >
> > > Does anyone have experience with setting up the EFI
> > >
> > > on a 16 injector BDS bugcatcher? Need help with base fuel map and cold
> > > start.
> > >
> > >
> > >
> > > _______________________________________________
> > > Diy_efi mailing list
> > > Diy_efi at diy-efi.org
> > > http://www.diy-efi.org/mailman/listinfo/diy_efi
> >
> >
> > _______________________________________________
> > Diy_efi mailing list
> > Diy_efi at diy-efi.org
> > http://www.diy-efi.org/mailman/listinfo/diy_efi
> >
>
>
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://www.diy-efi.org/mailman/listinfo/diy_efi


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi