Building a Flow bench

Greg Hermann bearbvd at mindspring.com
Sat Feb 2 00:55:50 GMT 2002


At 8:07 AM 2/1/02, Neil.Poersch at mts.mb.ca wrote:
>FWIW  I recall reading some web page where a fellow did build a flow bench
>using leaf blowers but he used six in parallel to obtain 25 in/hg.
>
>Neil

That's inches of H2O, again !! And would have to be compounded two or maybe
three deep to get close !!

Greg
>
>
>> Ah, but you are forgetting the other important variable, the
>> pressure ratio at which this flow occurs.  The leaf blower specs
>> are for free air on both sides of the turbine, which is probably
>> a pressure ratio of 1.2:1 or something really low.  When you
>> go to put it on a flow bench you want (iirc from a previous
>> post on this thread) about 25 in/Hg, or about 17 kPa absolute,
>> giving a pressure ratio across the turbine of about 6:1 or
>> higher; it just ain't gonna happen.
>
>
>
>----- End of forwarded message from owner-diy_efi at diy-efi.org -----
>----------------------------------------------------------------------------
>To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
>in the body of a message (not the subject) to majordomo at lists.diy-efi.org


----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Diy_efi mailing list