Flowbench

marko.cosic marko.cosic at ntlworld.com
Sat Feb 2 18:54:53 GMT 2002


http://www.killerhurtz.co.uk/sucker/index.htm

from:

http://www.killerhurtz.co.uk/

These model aero motors are incredibly high ouput/high speed, also expensive
but...
He was trying to use the old turbocharger as a suction unit, and managed 15in
Water/0.5psi, but the turbos were designed to blow, so should be more effective
at that.

How about trying an old turbocharger and one of these motors as an air source
for your flowbench? If its not enough you could always rig a burner unit or some
hose onto a car exhaust to power up the exhaust side of the turbo, and use the
wastegate to control/limit the 'boost' to 25 inches of water.

Apologies if this has already been suggested/investigated.

Marko

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Diy_efi mailing list