[WEG1192 at aol.com]

In a message dated 2/11/02 3:01:00 PM Eastern Standard Time, 
brandonsgarage at attbi.com writes:

> What is my best option of a frame mounted fuel pump for a TBI setup?
>  
>  Brandon Austin
Brandon,

I've used a Master E2000 on both TBI and TPI systems with no problems. But I 
recently bought an E2182 for $5 less that has a 5/16" barb on the outlet and 
a 1/2" bard on the inlet. The E2000 has Ford quick disconnect inlet and 
outlet which aren't exactly the best for sliding a rubber hose on to. Advance 
Auto Parts sells a Ford quick connect to 5/16" barb fitting that you probably 
would want to use on the outlet. On the inlet, since you are at a negative 
pressure relative to the tank, I don't think it would be too risky to just 
clamp a 3/8" rubber line on the quick connect fuel pump fitting. Both of the 
above pumps can be bought at Autozone for less than $70.

HTH
JW

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org