Instructs for DIY_WB US KIT

[Phil Hunter]

> I could use a set of instructions if they exists for the
> wide band assembly.  
[snip]

Back in early Nov. '01 there were a couple of messages that
should get you started, look in the archives for:
"Assembling the WB"

Use care w/ the 2 poly caps (C7 & C10) so they can't touch
the traces underneath, check the schematic for notes about
D6 & D7 mounting, U1 & R4 are mounted off the board due to
heat dissipation, and there's been some confusion over the
polarity of the LED (D2) and orientation of ISO1.

Once you're ready to test it out, search thru the archives
for tips, especially from Bruce Roe.

rgds,
philh
(digest)

__________________________________________________
Do You Yahoo!?
Send FREE Valentine eCards with Yahoo! Greetings!
http://greetings.yahoo.com

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org