Maximum Piston Speed

[The Dupuis]

Thanks, Glen - I was actually going to type it out for the guy!

> -----Original Message-----
> From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
> Behalf Of Glen and Sarah Hankins.
> Sent: January 2, 2002 5:57 PM
> To: diy_efi at diy-efi.org
> Subject: Re: Maximum Piston Speed
>
>
>
> > I'm interested in reading more but don't have access to
> backissues of Hotrod.
> > Would anyone be kind enough to scan and e-mail it to me?
> > The Dupuis wrote:
> >
> > > Have a look at Hot Rod June '97:  400 block bored .030,
> 307/327 crank, Ford
> > > 300 I-6 rods (6.209"), JE pistons, Air Flow Research 305- style heads,
> > > 215/215 @.050" Comp camshaft, 11:1 C/R, 87 octane fuel, 412.3
> hp @5700 and
> > > 435.0 ft-lbs @3800, with 390 ft-lbs from 2400 to 5400 rpm.
>
> http://www.monte-list.nu/articles.shtml
>
> It's on this page.  You'll need an unzip utility.
>
> -Glen
>
> ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
> ------------------------------------------------------------------
> ----------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without
> the quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org