Throttle body adapter

[Mark S. Riley]

That part number is for the upper plenum for a stock GN intake. Won't accept
a Ford throttle body or bolt on any kind of 4 bbl manifold.
Accell also makes a right angle adapter for a 4 bbl manifold but it won't
accept a Ford throttle body either. LT1 Camaro type only. Good luck, Mark
----- Original Message -----
From: "David Gregory" <dcg1174 at tntech.edu>
To: <diy_efi at diy-efi.org>
Sent: Friday, January 18, 2002 9:18 PM
Subject: RE: Throttle body adapter


> I've been doing some research and it seems these things are made for the
GN?
> So it would bolt to a "standard" intake, i.e. edelbrock?  These guys here
> (http://members.aol.com/bigturbo1/buick1.html) have one that is meant for
a
> 90mm Ford throttle body.  Perhaps this is the one the orginal poster saw
the
> ad for.
>
> Digging a bit deeper, i found a GM part number (25525146) on
www.gnttype.org
> for "intake, upper Plenum".  www.gmpartsdirect.com has that part number
> listed for $52.97.  I assume that if there are several alternatives for
the
> GM part, it doesn't flow particularly well.  But how well does it flow?
>
> I also had a question about TB sizing.  Whats a good rule of thumb to
> estimate the flow capacity of a standard round TB?
>
> Thanks,
>
> David
>
>
>
> -----Original Message-----
> From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org]On
> Behalf Of Mark S. Riley
> Sent: Friday, January 18, 2002 2:06 PM
> To: diy_efi at diy-efi.org
> Subject: Re: Throttle body adapter
>
>
> Precision Turbo & Engine in Hebron, Indiana does one of these.
> http://www.precisionte.com/main.htm     I think someone else does but
can't
> think of who it is. I do right much business with PT&E and they are pretty
> fair people to deal with. later, Mark
>
>
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org