Injector question

[Bruce]

From: "Dan Zorde" <dzorde at erggroup.com>
Subject: Injector question
> Two of them were replaced by the previous owner and look rather
> different.  The normal style I'm used to is the pintle style injector
> with the plastic cap on the end, these two are more like a hollow
> cylinder with the needle seated way up in the cylinder (is this the
> inverse conical Multec injectors ?).  From the looks of the port
> cleanliness these two were much cleaner than the others with the pintle
> injectors (obviously a much different spray pattern).  As I'm looking to
> possible get new injectors at some stage, should I be looking for these
> or stick to the pintle style ?
> Dan  dzorde at erggroup.com

The fuel spray is mostly at the runner floors and sides.  Really dosen't
matter alot in that case which you use.  Now some of the narrow tall port
injector pointed at valve heads would want the pencil spray
Bruce

----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org