live data/software?

[Matthew McCain]

Hello Bryan,

    I have used a program called EFILive V4 from
http://www.starrperformance.com.au/.  Paul Blackmore wrote it, along with
others.  It needs a MAX 232 circuit to interface to the computer serial port
to the ALDL port on the car.  You can buy one or make one yourself.  This
programs alows you to look at a bunch of sensors and values.  You can get
vehicle definitions that match your vehicle.  I am still working with my car
to interface it.  It has been rather cold here, and I don't have a garage.
Paul has been real helpful on setting up my definition file.

Matt McCain

----- Original Message -----
From: "Bryan Dacus" <isi at powernet.net>
To: "DIY-EFI email list" <DIY_EFI at lists.diy-efi.org>
Sent: Tuesday, January 29, 2002 7:03 PM
Subject: live data/software?


> i'm new to the list, so i hope this is an ok question.
>
> i'm relatively new to EFI but have been learning a lot in the past few
> months.  i have swapped in a 1992 GM 4.3 CPI into another vehicle.  i'm
> having some problems at high rpm and would like to look/read the live
> data (or preferable record it) from the ECM at this rpm as i drive.
>
> i have looked at several software programs offered online through
> several websites either as freeware or some commercial software but am
> unclear if they will actually do what i want on my particular engine/ecm
> combination.  what (if any) is the best software/hardware out there that
> people are using to do this?
>
> if it helps my GM ECM# is:  16156647, BAWP   and the PROM# is:
> 4122021, BAWP
>
> thanks, VERY MUCH!
> --
> Bryan Dacus
> Reno, NV.
>
>
> ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>
>
>


----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org