Eprom Burner Question

[Manuel Desantos]

Make sure that the power supply is working right.
I have a Pocket Programmer 2 and if you try to burn a chip without power
plugged in it will look like it's burning but won't verify to buffer.

That is all I can think of.
I have a P2 300mhz WinXP Pro machine.

-----Original Message-----
From: owner-diy_efi at diy-efi.org [mailto:owner-diy_efi at diy-efi.org] On
Behalf Of nicdoerk at hanoversd.mb.ca
Sent: Thursday, March 07, 2002 11:26 PM
To: DIY_EFI at lists.diy-efi.org
Subject: Eprom Burner Question

Does anyone on this list use a Rommax eprom burner?  I just picked up a
used one and can't seem to get it to work properly.  I've called the
company that sells the burner and they won't help.  I would never
recommend buying anything from EEtools.  They suggested my 266 PII is
too fast so I borrowed a 486 with no difference.  It does everything
it's supposed to but burn the eprom.  I get error msgs saying chip data
is different than buffer data.  Any suggestions?
Bernard

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
------------------------------------------------------------------------
----
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
in the body of a message (not the subject) to
majordomo at lists.diy-efi.org


----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org