Broke my ZF Transaxle speedo drive.

[john]

con, are you talking about a giocattolo?

j


----- Original Message -----
From: "Con Torrisi" <mini at bretts.com.au>
To: <diy_efi at diy-efi.org>
Sent: Sunday, March 10, 2002 8:28 AM
Subject: Broke my ZF Transaxle speedo drive.


> I have a rare car built in Australia based on the similar engineering to
the
> Detomaso Panteras in the 70's. It has a ZF 5-DS-25-2 transaxle with a 5
> litre efi V8.
>
> I've broken the speedo drive in the gearbox and I was wondering if any of
> you guys knew of a source of parts, new or second hand where I could get a
> replacement. ZF stuff is very rare here.
>
> (EFI CONTENT) The speedo cable has an integrated speed sensor which feeds
> into the ECU. When the drive broke the ECU fault warning light came on. At
> this stage I'm assuming the problem is the speed sensor. Is the speed
sensor
> usually only used for lean cruise on the highway? I can't give any other
> details about the ECU at this stage because the car is 6 feet off the
ground
> on a hoist at the shop getting the transaxle dissassembled to remove the
> broken drive.
>
> Any help greatly appreciated.
>
> Cheers
>
> Con Torrisi
>
> ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
> --------------------------------------------------------------------------
--
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the
quotes)
> in the body of a message (not the subject) to majordomo at lists.diy-efi.org
>

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org