DIY-WB02 display

Guy Hammer guyh at aracnet.com
Thu Mar 21 08:54:15 GMT 2002


On Tue, 12 Mar 2002, rr wrote:

> Then switch to a 10 ohm 5 W resistor. With this resistor the
> circuit will voltage limit at 10.4 to 10.5 volts. The current will
> typically be ~1.05A.
> 
> In this mode the circuit may be left powered up indefinitely.
> The resistor will get hot, so be careful.

That's 11.03 watts through a 5 watt resistor?! I'll say it'll get hot!
Not sure I agree that it can be left powered up indefinitely.

-- 
Guy Hammer, guyh at aracnet.com
http://www.aracnet.com/~guyh
--
 11:05am  up 8 days, 16:20,  7 users,  load average: 1.06, 1.03, 1.00

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org



More information about the Diy_efi mailing list