Tuning with the DIY-WBs

Geddes, Brian J brian.j.geddes at intel.com
Thu Mar 21 19:51:21 GMT 2002


This sounds GREAT...perhaps even better than an LED-digit style display.  As
much as I like raw numbers, in reality 40 LEDs is more than enough
resolution for accurate tuning.  I'm pretty recent to the list...is there a
website I can look at and/or acquire these displays?

Thanks,
- Brian

> -----Original Message-----
> From: Bruce [mailto:nacelp at bright.net]
> Sent: Wednesday, March 13, 1996 10:08 AM
> To: diy_efi at diy-efi.org; gmecm at diy-efi.org
> Subject: Tuning with the DIY-WBs
> 
> 
> 
> 
> Well,
> life just got easy.
> Almost too easy.
> 
> I have a couple of Bruce R's LED display boards.
> This is truely getting to the stage of being unfair.
> 
> In summary, they use 4, 10 element LEDs.  So you have 20 
> green and 20 red.
> As you go lean from Stoich the red ones illuminate.  Richer 
> then stoich on
> the greens go on.  They are in bargraph mode, and in columns. 
>  So, at a
> glance, you see 2 reds, OK you at a little leaner then 15:1.  
> Couple Greens,
> your at 13:1.  No lights on, your at stoich.
> 
> Seeing lean transistions, are just as clear as day.  Tip in 
> stuff can be
> cured in 2-3 tries, since you can so accurately see the leaness.
> 
> WOT,
> The unit can be out of your line of sight, and you can 
> *guestimate* where
> you're running.
> 
> They are responsive enough that if you run two of them you can see the
> latency in the exhuast system.
> 
> I'd still use some datalogging for optimising your system, 
> but this makes
> getting the drivibility stuff a piece of cake.
> 
> Amazingggggggg,
> Bruce
> 
> 
> ----- End of forwarded message from owner-diy_efi at diy-efi.org -----
> --------------------------------------------------------------
> --------------
> To unsubscribe from diy_efi, send "unsubscribe diy_efi" 
> (without the quotes)
> in the body of a message (not the subject) to 
> majordomo at lists.diy-efi.org
> 

----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Diy_efi mailing list