Tuning with the DIY-WBs

Bruce nacelp at bright.net
Tue Mar 26 07:50:25 GMT 2002


As well you should be.
After 1,100 miles this last weekend, you can develope a Mind Meld with them.
They can be assimilated.
Bruce
   Doc is wearing his Borq gear today...


From: "romans, mark" <romans at starstream.net>
Subject: Re: Tuning with the DIY-WBs
> I'm drooling, I'M DROOLING in ANTICIPATION!
> Mark

> From: "Bruce" nacelp at bright.net
> Subject: Tuning with the DIY-WBs
> > Well,
> > life just got easy.
> > Almost too easy.
> > I have a couple of Bruce R's LED display boards.
> > This is truely getting to the stage of being unfair.
> > In summary, they use 4, 10 element LEDs.  So you have 20 green and 20
red.
> > As you go lean from Stoich the red ones illuminate.  Richer then stoich
on
> > the greens go on.  They are in bargraph mode, and in columns.  So, at a
> > glance, you see 2 reds, OK you at a little leaner then 15:1.  Couple
> Greens,
> > your at 13:1.  No lights on, your at stoich.
> >
> > Seeing lean transistions, are just as clear as day.  Tip in stuff can be
> > cured in 2-3 tries, since you can so accurately see the leaness.
> >
> > WOT,
> > The unit can be out of your line of sight, and you can *guestimate*
where
> > you're running.
> >
> > They are responsive enough that if you run two of them you can see the
> > latency in the exhuast system.
> >
> > I'd still use some datalogging for optimising your system, but this
makes
> > getting the drivibility stuff a piece of cake.
> >
> > Amazingggggggg,
> > Bruce


----- End of forwarded message from owner-diy_efi at diy-efi.org -----
----------------------------------------------------------------------------
To unsubscribe from diy_efi, send "unsubscribe diy_efi" (without the quotes)
in the body of a message (not the subject) to majordomo at lists.diy-efi.org




More information about the Diy_efi mailing list