[Diy_efi] "Wet" Manifold Questions
Greg Hermann
bearbvd at mindspring.com
Mon May 20 04:25:22 GMT 2002
>
>Also, in relation to Mark's reply, almost all, if not all OEM
>applications of Positive displacement SC's (roots and Lysholm)
>put the blower AFTER the throttle body. These blowers do not
>apparently like to work in blow-thru applications, at least
>according to everything I have read, and been told...
>
>Steve
>
Running a positive displacement blower in a (partial) vacuum, such as is
done at light load when it is in a draw through configuration tends to
minimize the losses, blow-off valve or no.
Running one blow through would tend to create huge losses and get
everything really hot---
Greg
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi
More information about the Diy_efi
mailing list