[Diy_efi] Newbie with a simplified Motronic project

William Shurvinton shurvinton at orange.net
Sat Nov 2 17:11:21 GMT 2002


So how does you superdeedooper MAF deal with a 300° CAM.?

If the sensor doesn't change with time how come there are cleaning cycles
built into the ECU program to try and burn off accumulated crud.?

A MAP sensor is more linear than MAF and generally has a higher dynamic
range, Neither are much of an issue for stock apps, but if you are after
high performance it starts to become more of an issue.

I would also take to task your assertion that the MAP is more of an average
than MAF. The output of a MAF sensor is instantaneous flow. You still need
to integrate to get total flow.
----- Original Message -----
From: "Adam Wade" <espresso_doppio at yahoo.com>
To: <diy_efi at diy-efi.org>
Sent: Friday, November 01, 2002 7:52 PM
Subject: Re: [Diy_efi] Newbie with a simplified Motronic project




_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi



More information about the Diy_efi mailing list