[Diy_efi] Group buy
jay zumwalt
pjzum at yahoo.com
Wed Nov 13 17:32:11 GMT 2002
--0-1186764802-1037165798=:25536
Content-Type: text/plain; charset=us-ascii
Thanks Oolan. As I said earlier I sent AEM an email and they did not respond. I will try again.
Jay Z
Oolan Zimmer <o_zimmer at soltec.net> wrote:I know some people with AEM computers read this list. I don't have one,
and don't know how much control over the timing of fuel injection pulses
you have. I know you can set the pulse width. I believe that the AEM
computer can do everything a MoTeC M48 can do for a lot less.
There is a bulletin board dedicated to AEM computer users, you can get your
question answered there. Go to www.aempower.com and follow the link. AEM
engineers seem fairly responsive on that board.
Back to lurking...
Oolan Zimmer
o_zimmer at soltec.net
At 10:39 AM 11/11/2002 -0800, you wrote:
>Dave: This is unrelated to your post, I hope you dont
>mind. I am there to learn a little about efi. I don't have much to
>contribute. My application is a little out of the ordinary.
>
>I have a question for you since your with a company that represents
>many suppliers of controllers. I am looking for a controller that allow me
>to move the fuel injection pulse to anywhere between 180 deg BTDC to
>TDC. We have looked at many but most of the ones we have looked at do not
>move the injection pulse. We are settling on the MoTec 48 but wondered if
>there was anything any cheaper? Do you know anything about AEM Power? I
>sent them an email but they have not returned one. I am also starting to
>look at Accel.
>
>Any help you or anyone else can provide would be much appreciated.
>
>Thanks
>
>Jay Zumwalt
>
> Dave Dahlgren
wrote:
>At the risk of this sounding like a commercial or spam I can make an
>interesting
>offer. I am, well my company is actually, a WD for msd fuel systems,
>twm,motec,
>haltech, kinsler, innovative turbo, spearco, accufab, aeromotive and
>probably a
>couple of others that escape me at this early hour.. unfortunately not
>crane or
>accel. If there is anything that anyone needs the first place i would
>suggest is
>Summit as their pricing is very close to WD for most things but not all.
>Second
>if anyone needs one or two of something that fits in with my list of WD
>accounts
>I can always be contacted by e-mail to see how cheap i can get one for
>you. Best
>case is if I can place the order along with a normal stocking order,have it
>shipped ground in both directions and it is paid for up front to avoid the
>cod
>related stuff. i am sorry to say i can't sell the stuff at cost but some
>small
>and reasonable number over that to cover my time of packaging and
>paperwork. And
>yes this offer is only open to someone on this list, the GM list, and the
>EFI332
>list. Also appreciate it is something i will do for an hour or two a
>couple days
>a week as far as quoting prices etc.. as i have a lot of other things
>going on
>here as well and can't drop them to see how cheap i can get something
>every day.
>It would be also helpful to give me either what you want to pay or your best
>quote so that i don't waste a bunch of time trying for the ridiculous if you
>know what i mean. Like wanting a motec m48 and being willing to pay 500 for
>it...
>
>If this post is unwelcome my apologies, only trying to help any
>individuals in
>lieu of a group buy..
>
>Dave Dahlgren
>
>CJ Virtual wrote:
> >
> > I want to get me some other bits for my efi Set up and was wondering if
> any
> > one would be interested in participating in a group buy for throttle
> bodies
> > and other pieces of EFI hardware.
>&Re [Diy_efi] Group buy.ems gt;
> > It will be way cheaper to get them at a whole sale price than to be buying
> > them retail. Places like Crane and MSD be always pointing me to
> retailers when
> > i say i want just one of any thing but hey, not every one can afford
> retail
> > price, and get their product runnig in the time they want.
> >
> > Thanks for your time
> >
> > Let me know what you think, I really need some input
> >
> > Pedro
> >
>
>
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>http://www.diy-efi.org/mailman/listinfo/diy_efi
>
>
>
>Do you Yahoo!?
>U2 on
>LAUNCH - Exclusive medley & videos from Greatest Hits CD
>---
>Incoming mail is certified Virus Free.
>Checked by AVG anti-virus system (http://www.grisoft.com).
>Version: 6.0.401 / Virus Database: 226 - Release Date: 10/9/2002
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.401 / Virus Database: 226 - Release Date: 10/9/2002
---------------------------------
Do you Yahoo!?
U2 on LAUNCH - Exclusive medley & videos from Greatest Hits CD
--0-1186764802-1037165798=:25536
Content-Type: text/html; charset=us-ascii
<P>Thanks Oolan. As I said earlier I sent AEM an email and they did not respond. I will try again.
<P>Jay Z
<P> <B><I>Oolan Zimmer <o_zimmer at soltec.net></I></B> wrote:
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">I know some people with AEM computers read this list. I don't have one, <BR>and don't know how much control over the timing of fuel injection pulses <BR>you have. I know you can set the pulse width. I believe that the AEM <BR>computer can do everything a MoTeC M48 can do for a lot less.<BR><BR>There is a bulletin board dedicated to AEM computer users, you can get your <BR>question answered there. Go to www.aempower.com and follow the link. AEM <BR>engineers seem fairly responsive on that board.<BR><BR>Back to lurking...<BR><BR>Oolan Zimmer<BR>o_zimmer at soltec.net<BR><BR>At 10:39 AM 11/11/2002 -0800, you wrote:<BR><BR>>Dave: This is unrelated to your post, I hope you dont<BR>>mind. I am there to learn a little about efi. I don't have much to<BR>>contribute. My application is a little out of the ordinary.<BR>><BR>>I have a question for you since your with a company that represents<BR>>many suppliers of controllers. I am looking for a controller that allow me<BR>>to move the fuel injection pulse to anywhere between 180 deg BTDC to<BR>>TDC. We have looked at many but most of the ones we have looked at do not <BR>>move the injection pulse. We are settling on the MoTec 48 but wondered if <BR>>there was anything any cheaper? Do you know anything about AEM Power? I <BR>>sent them an email but they have not returned one. I am also starting to <BR>>look at Accel.<BR>><BR>>Any help you or anyone else can provide would be much appreciated.<BR>><BR>>Thanks<BR>><BR>>Jay Zumwalt<BR>><BR>> Dave Dahlgren <DDAHLGREN at SNET.NET>wrote:<BR>>At the risk of this sounding like a commercial or spam I can make an <BR>>interesting<BR>>offer. I am, well my company is actually, a WD for msd fuel systems, <BR>>twm,motec,<BR>>haltech, kinsler, innovative turbo, spearco, accufab, aeromotive and <BR>>probably a<BR>>couple of others that escape me at this early hour.. unfortunately not <BR>>crane or<BR>>accel. If there is anything that anyone needs the first place i would <BR>>suggest is<BR>>Summit as their pricing is very close to WD for most things but not all. <BR>>Second<BR>>if anyone needs one or two of something that fits in with my list of WD <BR>>accounts<BR>>I can always be contacted by e-mail to see how cheap i can get one for <BR>>you. Best<BR>>case is if I can place the order along with a normal stocking order,have it<BR>>shipped ground in both directions and it is paid for up front to avoid the <BR>>cod<BR>>related stuff. i am sorry to say i can't sell the stuff at cost but some <BR>>small<BR>>and reasonable number over that to cover my time of packaging and <BR>>paperwork. And<BR>>yes this offer is only open to someone on this list, the GM list, and the <BR>>EFI332<BR>>list. Also appreciate it is something i will do for an hour or two a <BR>>couple days<BR>>a week as far as quoting prices etc.. as i have a lot of other things <BR>>going on<BR>>here as well and can't drop them to see how cheap i can get something <BR>>every day.<BR>>It would be also helpful to give me either what you want to pay or your best<BR>>quote so that i don't waste a bunch of time trying for the ridiculous if you<BR>>know what i mean. Like wanting a motec m48 and being willing to pay 500 for<BR>>it...<BR>><BR>>If this post is unwelcome my apologies, only trying to help any <BR>>individuals in<BR>>lieu of a group buy..<BR>><BR>>Dave Dahlgren<BR>><BR>>CJ Virtual wrote:<BR>> ><BR>> > I want to get me some other bits for my efi Set up and was wondering if <BR>> any<BR>> > one would be interested in participating in a group buy for throttle <BR>> bodies<BR>> > and other pieces of EFI hardware.<BR>>&Re [Diy_efi] Group buy.ems gt;<BR>> > It will be way cheaper to get them at a whole sale price than to be buying<BR>> > them retail. Places like Crane and MSD be always pointing me to <BR>> retailers when<BR>> > i say i want just one of any thing but hey, not every one can afford <BR>> retail<BR>> > price, and get their product runnig in the time they want.<BR>> ><BR>> > Thanks for your time<BR>> ><BR>> > Let me know what you think, I really need some input<BR>> ><BR>> > Pedro<BR>> ><BR>><BR>><BR>><BR>>_______________________________________________<BR>>Diy_efi mailing list<BR>>Diy_efi at diy-efi.org<BR>>http://www.diy-efi.org/mailman/listinfo/diy_efi<BR>><BR>><BR>><BR>>Do you Yahoo!?<BR>><HTTP: u2 launch.yahoo.com *http: mailsig launch rd.yahoo.com>U2 on <BR>>LAUNCH - Exclusive medley & videos from Greatest Hits CD<BR>>---<BR>>Incoming mail is certified Virus Free.<BR>>Checked by AVG anti-virus system (http://www.grisoft.com).<BR>>Version: 6.0.401 / Virus Database: 226 - Release Date: 10/9/2002<BR><BR>---<BR>Outgoing mail is certified Virus Free.<BR>Checked by AVG anti-virus system (http://www.grisoft.com).<BR>Version: 6.0.401 / Virus Database: 226 - Release Date: 10/9/2002<BR></BLOCKQUOTE><p><br><hr size=1>Do you Yahoo!?<br>
<a href="http://rd.yahoo.com/launch/mailsig/*http://launch.yahoo.com/u2">U2 on LAUNCH</a> - Exclusive medley & videos from Greatest Hits CD
--0-1186764802-1037165798=:25536--
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi
More information about the Diy_efi
mailing list