[Diy_efi] Group buy

[Geddes, Brian J]

The AEM gives you total control over injector pulse - both width and start
time.  Jump on their board at www.aempower.com/bbs to learn more about the
unit.  Also, they have a good presentation at
http://aempower.com/pp/pp_presentation_files/frame.htm  They've been super
busy since releasing their EMS, and sometimes don't have time to answer
email.  The bulletin board or phone is the best way to contact them for
info.

- Brian


-----Original Message-----
From: Oolan Zimmer [mailto:o_zimmer at soltec.net]
Sent: Monday, November 11, 2002 3:40 PM
To: diy_efi at diy-efi.org
Subject: Re: [Diy_efi] Group buy


I know some people with AEM computers read this list.  I don't have one, 
and don't know how much control over the timing of fuel injection pulses 
you have.  I know you can set the pulse width.  I believe that the AEM 
computer can do everything a MoTeC M48 can do for a lot less.

There is a bulletin board dedicated to AEM computer users, you can get your 
question answered there.  Go to www.aempower.com and follow the link.  AEM 
engineers seem fairly responsive on that board.

Back to lurking...

Oolan Zimmer
o_zimmer at soltec.net

At 10:39 AM 11/11/2002 -0800, you wrote:

>Dave: This is unrelated to your post, I hope you dont
>mind. I am there to learn a little about efi. I don't have much to
>contribute. My application is a little out of the ordinary.
>
>I have a question for you since your with a company that represents
>many suppliers of controllers. I am looking for a controller that allow me
>to move the fuel injection pulse to anywhere between 180 deg BTDC to
>TDC. We have looked at many but most of the ones we have looked at do not 
>move the injection pulse. We are settling on the MoTec 48 but wondered if 
>there was anything any cheaper? Do you know anything about AEM Power? I 
>sent them an email but they have not returned one. I am also starting to 
>look at Accel.
>
>Any help you or anyone else can provide would be much appreciated.
>
>Thanks
>
>Jay Zumwalt
>
>  Dave Dahlgren <ddahlgren at snet.net> wrote:
>At the risk of this sounding like a commercial or spam I can make an 
>interesting
>offer. I am, well my company is actually, a WD for msd fuel systems, 
>twm,motec,
>haltech, kinsler, innovative turbo, spearco, accufab, aeromotive and 
>probably a
>couple of others that escape me at this early hour.. unfortunately not 
>crane or
>accel. If there is anything that anyone needs the first place i would 
>suggest is
>Summit as their pricing is very close to WD for most things but not all. 
>Second
>if anyone needs one or two of something that fits in with my list of WD 
>accounts
>I can always be contacted by e-mail to see how cheap i can get one for 
>you. Best
>case is if I can place the order along with a normal stocking order,have it
>shipped ground in both directions and it is paid for up front to avoid the 
>cod
>related stuff. i am sorry to say i can't sell the stuff at cost but some 
>small
>and reasonable number over that to cover my time of packaging and 
>paperwork. And
>yes this offer is only open to someone on this list, the GM list, and the 
>EFI332
>list. Also appreciate it is something i will do for an hour or two a 
>couple days
>a week as far as quoting prices etc.. as i have a lot of other things 
>going on
>here as well and can't drop them to see how cheap i can get something 
>every day.
>It would be also helpful to give me either what you want to pay or your
best
>quote so that i don't waste a bunch of time trying for the ridiculous if
you
>know what i mean. Like wanting a motec m48 and being willing to pay 500 for
>it...
>
>If this post is unwelcome my apologies, only trying to help any 
>individuals in
>lieu of a group buy..
>
>Dave Dahlgren
>
>CJ Virtual wrote:
> >
> > I want to get me some other bits for my efi Set up and was wondering if 
> any
> > one would be interested in participating in a group buy for throttle 
> bodies
> > and other pieces of EFI hardware.
>&Re [Diy_efi] Group buy.ems gt;
> > It will be way cheaper to get them at a whole sale price than to be
buying
> > them retail. Places like Crane and MSD be always pointing me to 
> retailers when
> > i say i want just one of any thing but hey, not every one can afford 
> retail
> > price, and get their product runnig in the time they want.
> >
> > Thanks for your time
> >
> > Let me know what you think, I really need some input
> >
> > Pedro
> >
>
>
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>http://www.diy-efi.org/mailman/listinfo/diy_efi
>
>
>
>Do you Yahoo!?
><http://rd.yahoo.com/launch/mailsig/*http://launch.yahoo.com/u2>U2 on 
>LAUNCH - Exclusive medley & videos from Greatest Hits CD
>---
>Incoming mail is certified Virus Free.
>Checked by AVG anti-virus system (http://www.grisoft.com).
>Version: 6.0.401 / Virus Database: 226 - Release Date: 10/9/2002

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi