[Diy_efi] thanx for the help 1227749

Sun Nov 17 19:17:55 GMT 2002

--part1_d0.300ff1f3.2b087d38_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

well im not sure why it works. honda swear up and down that its a hall effet 
however most testing just show it to be a simple magneitc trigger. it has the 
correct switch on switch off impedence. also my timing is what ever is speced 
inside the erpom as deliverd. i had original brought the low ref wire to the 
ecm without it being grounded but it wouldnt correctly control timing. i 
brought the low ref to ground and wham it works. i cant explain everythign 
but im sure some one here will.

--part1_d0.300ff1f3.2b087d38_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

<HTML><FONT FACE=arial,helvetica><FONT  SIZE=2 FAMILY="SANSSERIF" FACE="Arial" LANG="0">well im not sure why it works. honda swear up and down that its a hall effet however most testing just show it to be a simple magneitc trigger. it has the correct switch on switch off impedence. also my timing is what ever is speced inside the erpom as deliverd. i had original brought the low ref wire to the ecm without it being grounded but it wouldnt correctly control timing. i brought the low ref to ground and wham it works. i cant explain everythign but im sure some one here will.</FONT></HTML>

--part1_d0.300ff1f3.2b087d38_boundary--

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi