[Diy_efi] WB on a dual exhaust?

[William Shurvinton]

Normally you have 2 systems 1 per, or you swap between them to check.

If you have a relatively normal engine and your fueling is up to par there
is a good arguament to say that you can get away with monitoring only 1
pipe.

Bill
----- Original Message -----
From: Guncotton
To: diy_efi at diy-efi.org
Sent: Wednesday, September 04, 2002 8:02 PM
Subject: [Diy_efi] WB on a dual exhaust?


I'm planning on starting to build my own diy_WB but before I do I have a
question.  How does one go about using the WB on a system that has true dual
exhaust? By true I mean that there is no y pipe, each bank (this is a 350)
has it's own pipe to the exhaust manifold, to a invidual cats and mufflers.
Also there is no h-pipe or crossover in the system.

Cheers,

M.


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi