[Diy_efi] 2.0 diss module with the 1227749
Djfreggens at aol.com
Djfreggens at aol.com
Tue Sep 10 14:37:51 GMT 2002
--part1_19f.852b53c.2aaecc00_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
yeah i have found the stuff on the diy-efi website. most of it it actually
useless garble. i geuss i going to have to find a cavalier and get a couple
of probes out and use the osciliscope. im sorry others have let you down. has
anyone ever checked the output of the ecm to the module ??? i keep hearing
that the duty cycle is 50% or so. also that is uses a high low refrence.
formt eh schematic i looked at it was pretty simple. the module handle all
the tpu need for the coil firing and the ecm simply provid a command siganl.
just like a normal module on hei would. i think yr battle is in the ref
angle and the output signal. ill be a nice guy and get a couple of shots of
the actuall dis module runnig on a car and comapare it to a normal hei shots.
the answer has got to be pretty simple. ill get back to you in a few days. my
question was basically has anyone done it and did it work. i got
no and no .
thats ok. ill get it working or at least figure out why it doesnt work. but
if i can provide you with why the pid loop doenst work can you help me recode
the 749 to operate properly. ???im pretty sure the answer is under our noses
staring us in the face as always.
--part1_19f.852b53c.2aaecc00_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: 7bit
<HTML><FONT FACE=arial,helvetica><FONT SIZE=2>yeah i have found the stuff on the diy-efi website. most of it it actually useless garble. i geuss i going to have to find a cavalier and get a couple of probes out and use the osciliscope. im sorry others have let you down. has anyone ever checked the output of the ecm to the module ??? i keep hearing that the duty cycle is 50% or so. also that is uses a high low refrence. formt eh schematic i looked at it was pretty simple. the module handle all the tpu need for the coil firing and the ecm simply provid a command siganl. just like a normal module on hei would. i think yr battle is in the ref angle and the output signal. ill be a nice guy and get a couple of shots of the actuall dis module runnig on a car and comapare it to a normal hei shots. the answer has got to be pretty simple. ill get back to you in a few days. my question was basically has anyone done it and did it work. i got
<BR>
<BR> no and no .
<BR>
<BR> thats ok. ill get it working or at least figure out why it doesnt work. but if i can provide you with why the pid loop doenst work can you help me recode the 749 to operate properly. ???im pretty sure the answer is under our noses staring us in the face as always.</FONT></HTML>
--part1_19f.852b53c.2aaecc00_boundary--
_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi
More information about the Diy_efi
mailing list