[Diy_efi] More knock detection info

[Perry Harrington]

The ESC module is available for $73.99 from Napa.  The part number is
ECHESC203

They show 2 knock sensors for the corvette.  Mileage plus and Echlin.

The MPE number is MPE DKS209SB and the Echlin number is ECH DKS209.  The
prices are $31.99 and $41.99 respectively.

So it seems for a little over 100 bucks in new parts you could have a
knock detection box for a V8.

BTW, the application is for an L98.  That's an Al headed cast iron block
9:1 350 V8 with Al TPI manifold.

The Sensor is mounted just above the oil pan rail next to the starter in
a coolant jacket port.

I don't know the thread size, but Fords have block drains in these same locations,
as well as a 5/16 oil gallery port on the left side of the block.

--Perry

-- 
Perry Harrington			Data Acquisition & Instrumentation, Inc	
perry at dainst dot com					 http://www.dainst.com/

Those who would give up essential liberty to purchase a little temporary safety
deserve neither liberty or safety. Nor, are they likely to end up with either.
                             -- Benjamin Franklin

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi