[Diy_efi] MGB EFI

[Mike]

assuming they are your fingers,

*grin*

mike

At 06:21 PM 6/2/2003 -0800, you wrote:
>
>
>DOH! Sometimes the fingers are faster than the brain.
>
>
>-----Original Message-----
From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]
>On Behalf Of Programmer
>Sent: Thursday, February 06, 2003 6:17 PM
>To: List for general do-it-yourself EFI talk
>Subject: Re: [Diy_efi] MGB EFI
>
>
>TBI with a MAF ? Can't think of one...
>
>Lyndon
>
>----- Original Message ----- 
From: "Mark Linder" <mark.linder at verizon.net>
>To: "'List for general do-it-yourself EFI talk'" <diy_efi at diy-efi.org>
>Sent: Thursday, February 06, 2003 6:26 PM
>Subject: RE: [Diy_efi] MGB EFI
>
>
>> 
>> A Pontiac Fiero or an S- series GM or Chevy pickup would be a good 
>> starting point.  Not sure if they are MAP or MAF.
>> 
>> 
>> -----Original Message-----
>> From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]
>> On Behalf Of Tyler Madia
>> Sent: Thursday, February 06, 2003 5:22 PM
>> To: List for general do-it-yourself EFI talk
>> Subject: Re: [Diy_efi] MGB EFI
>> 
>> 
>> I would be happy with a TBI setup if I could find a GM application 
>> with a 4 cylinder TBI and MAS.  I think I could adapt that pretty 
>> easily. Anybody know of such a combination?
>> 
>> Tyler
>> 
>> ----- Original Message -----
>> From: <bill.shurvinton at nokia.com>
>> To: <diy_efi at diy-efi.org>
>> Sent: Thursday, February 06, 2003 2:27 AM
>> Subject: RE: [Diy_efi] MGB EFI
>> 
>> 
>> If you mean A-series with siamese ports, this can be done. There are 
>> even kits available if you have big $$. These all use a single 
>> injector, TBI style.
>> 
>> A home-brew 2 injector per port system is yet to be DIY'd although you
>
>> could pull the MPI system off a late model mini. However this is 
>> hightly complex merely to meet emissions so of little use for the 
>> power hungry.
>> 
>> Bill
>> -----Original Message-----
>> From: ext Tyler Madia [mailto:tmadia at uswest.net]
>> Sent: Thursday, February 06, 2003 4:30 AM
>> To: diy_efi at diy-efi.org
>> Subject: [Diy_efi] MGB EFI
>> 
>> 
>> The archives were a bit vague on the subject of applying EFI to an 
>> MGB. Did anyone succeed with this endeavor?  It's definitely something
>
>> I've always wanted to do...
>> 
>> Thanks,
>> Tyler Madia
>> 
>> _______________________________________________
>> Diy_efi mailing list
>> Diy_efi at diy-efi.org http://www.diy-efi.org/mailman/listinfo/diy_efi
>> 
>> 
>> _______________________________________________
>> Diy_efi mailing list
>> Diy_efi at diy-efi.org http://www.diy-efi.org/mailman/listinfo/diy_efi
>> 
>> 
>> 
>> _______________________________________________
>> Diy_efi mailing list
>> Diy_efi at diy-efi.org http://www.diy-efi.org/mailman/listinfo/diy_efi
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org http://www.diy-efi.org/mailman/listinfo/diy_efi
>
>
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>http://www.diy-efi.org/mailman/listinfo/diy_efi
>
>

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi