[Diy_efi] Intake manifold flow testing

[Geddes, Brian J]

How different would the A/F ratio in the cylinders need to be in order =
to create a 100F difference in EGTs?  Are we talking about a tenth of a =
point, or a point, or a couple points?  My concern is the EGT may be too =
coarse a measurement.

- Brian

>=20
> I would never use it for any kind of absolute numbers as it=20
> is as much timing
> related as anything else. With that said you are only looking for a
> differential.. If the timing is the same in all cylinders and=20
> the fuel is the
> same then the egt ought to be as well if you allow a little=20
> 'windage' for
> cooling system issues. If they are different then I would bet=20
> the only thing
> that is different is the airflow.. It might be worth a little=20
> fuel tweaking to
> even them up if they are a lot different.. Over 100 deg F=20
> would be my threshold
> to play a little.
> Dave=20
> "Geddes, Brian J" wrote:
> >=20
> > Is there a close enough correlation between EGT and A/F to=20
> use EGT to estimate the relative airflow differences?  I=20
> thought that the EGT-A/F connection wasn't very exact...but=20
> I'm certainly no expert.
> >=20
> > - Brian
> >=20
> > > -----Original Message-----
> > > From: Dave Dahlgren [mailto:ddahlgren at snet.net]
> > > Sent: Tuesday, February 11, 2003 12:15 PM
> > > To: List for general do-it-yourself EFI talk
> > > Subject: Re: [Diy_efi] Intake manifold flow testing
> > >
> > >
> > > The sad part about this problem is that it most likely
> > > changes with rpm as well
> > > that is to say they can move around. a rich one at 4500 might
> > > be a lean one at
> > > 6000.  You could probably verify they stay the same by using
> > > some egt probes and
> > > data logging them along with rpm map and tps..Above all i
> > > think i would only
> > > want to add fuel.. Best idea is get a better intake manifold.
> > > Dave
> >=20
> > _______________________________________________
> > Diy_efi mailing list
> > Diy_efi at diy-efi.org
> > http://www.diy-efi.org/mailman/listinfo/diy_efi
>=20
>=20
> _______________________________________________
> Diy_efi mailing list
> Diy_efi at diy-efi.org
> http://www.diy-efi.org/mailman/listinfo/diy_efi
>=20

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi