[Diy_efi] schematic critique (now gas tank drawing)

Toyota Supra turbosupramk3 at hotmail.com
Fri Feb 21 21:34:59 GMT 2003


ok, you'll have to forgive this sad drawing, hopefully this helps make 
sense, i don't have photoshop here

here is the link http://68.7.7.84:8080/schematics/tankcomparison1.bmp

a) yes, there is two of them

b) no, there is not

c) no, but there is no out of tank pump

d) not sure what you mean, both pumps have pickup filters on them



let me know what you think, thanks

-j






From: Mike <erazmus at iinet.net.au>
>Reply-To: List for general do-it-yourself EFI talk <diy_efi at diy-efi.org>
>To: List for general do-it-yourself EFI talk <diy_efi at diy-efi.org>
>Subject: Re: [Diy_efi] schematic critique
>Date: Fri, 21 Feb 2003 23:39:32
>
>Hi J,
>
>I dont seem to be getting a clear idea, can you intersperse your
>answers to these questions:-
>
>a.	Is there an in-tank fuel pump ?
>
>b.	Is there a separate high pressure fuel pump, like a Bosch
>	equivalent roller ball type pump ?
>
>c.	The tank outlet that goes to the high pressure pump
>	(if its not the in-tank one) - is it high up on the tank?
>
>d.	Is there some sort of 'swirl-pot' so the fuel return
>	keeps the crud away from the tank outlet to the pump ?
>
>rdgs
>
>mike
>
>
>
>At 09:12 AM 21/2/2003 -0500, you wrote:
> >
> >it has a venturi valve, designed for a pump that can flow enough fuel for
> >300rwhp, and that certainly won't work when fuel flow has been increased 
>to
> >two pumps that flow enough for 500rwhp each, it increases base pressure 
>way
> >too high because of its restrictiveness.
> >
> >its quite a ghey setup, but what can you do but try and beat it?
> >
> >-j
> >
> >
> >
> >
> >
> >
> >>From: Mike <erazmus at iinet.net.au>
> >>Reply-To: List for general do-it-yourself EFI talk <diy_efi at diy-efi.org>
> >>To: List for general do-it-yourself EFI talk <diy_efi at diy-efi.org>
> >>Subject: Re: [Diy_efi] schematic critique
> >>Date: Fri, 21 Feb 2003 20:10:47
> >>
> >>At 02:13 AM 20/2/2003 -0500, you wrote:
> >> >there currently is no fittings on the bottom of the tank, only straps
> >>that
> >> >hold it in place
> >>
> >>mmmmm ? so what is used to supply fuel in the first place from the
> >>main tank ?
> >>
> >>Is there an in-tank fuel pump and the feed out from this is somewhat
> >>higher than the bottom of the tank ?
> >>
> >> >i do have a digi cam, when i put the trans back in her, i will try and
> >>snap
> >> >some pics for you
> >>
> >>Yeah great, sounds like a curious setup...~`:o <shrug>
> >>
> >>rgds
> >>
> >>mike
> >>
> >>
> >>
> >> >
> >> >-j
> >> >
> >> >
> >> >
> >> >
> >> >


_________________________________________________________________
Add photos to your e-mail with MSN 8. Get 2 months FREE*.  
http://join.msn.com/?page=features/featuredemail


_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi



More information about the Diy_efi mailing list