[Diy_efi] Pre-TB water/alky nozzle orientation

Mike erazmus at iinet.net.au
Sat Jan 11 06:13:35 GMT 2003


Actually there are quite a few items from that source that I
could use here, I'd recommend anyone in Aust on this list to
take a look at that site and maybe we can get a sizable order
together and save some freight, 

rgds

mike



At 02:01 PM 1/11/03 +0800, you wrote:
>I could do with a couple or maybe 4 in Perth, Western Australia
>does anyone want to participate in getting a few over to save
>on freight - Bernd  ?
>
>rgds
>
>mike
>
>
>
>At 07:58 PM 1/10/03 -0500, you wrote:
>>I like them a lot - I think they mist very well.  I can't really comment on
>>which is better - but I'm under the impression that using fuel injectors to
>>inject water may lead to premature injector failure.  If I wanted additional
>>fuel, I would use fuel injectors - for water these mini misting nozzles work
>>great.  They can be found at http://www.mcmaster.com - search for nozzle and
>>then click on 'Adjustable Spray Angle High-Pressure Nozzle'.  Part
numbers of
>>3178K61 through 3178K77 for the full cone type and they come in flow
>ratings of
>>1 to 15GPH at 100psi.
>>If anyone cannot view the videos in WMV format, I can convert them to MPG or
>>whatever - just let me know.
>>Thanks.
>>http://cybrina.mine.nu
>>                                                            joeo
>>
>>Brian Michalk wrote:
>>
>>> How do you like those nozzles?
>>> I ogled them for some time for use as my backup fuel injectors.
>>>
>>> On my aircraft engine, I decided to go with the Bosch CIS injectors for
>>> backup.  In your opinion would their nozzles work for such a situation?
>>>
>>> Remember, this is for backup, to make enough power to get me on the ground
>>> safely.  I have no concerns over precise mixture, even distribution, or
>>> maximum power output.  All I want is reliability.
>>>
>>> Which part numbers are you using?
>>>
>>> > -----Original Message-----
>>> > From: diy_efi-bounces at diy-efi.org [mailto:diy_efi-bounces at diy-efi.org]On
>>> > Behalf Of Joseph Obernberger
>>> > Sent: Thursday, January 09, 2003 11:31 PM
>>> > To: diy_efi at diy-efi.org
>>> > Subject: Re: [Diy_efi] Pre-TB water/alky nozzle orientation
>>> >
>>> >
>>> > Kinda late to the thread, but I recently took some video footage of my
>DIY
>>> > water injection system spraying inside the throttle body.  I'm
>>> > using mcmaster
>>> > car mini misting nozzles, and they spray perpendicular to the air
>>> > flow.  This
>>> > setup seems to be working well for me, but I'm wondering if there are
>>> > suggestions?
>>> > Thanks!
>>> > http://cybrina.mine.nu/Description.htm
>>> > http://cybrina.mine.nu
>>> >
>>> > joeo
>>>
>>> _______________________________________________
>>> Diy_efi mailing list
>>> Diy_efi at diy-efi.org
>>> http://www.diy-efi.org/mailman/listinfo/diy_efi
>>
>>
>>_______________________________________________
>>Diy_efi mailing list
>>Diy_efi at diy-efi.org
>>http://www.diy-efi.org/mailman/listinfo/diy_efi
>>
>>
>
>_______________________________________________
>Diy_efi mailing list
>Diy_efi at diy-efi.org
>http://www.diy-efi.org/mailman/listinfo/diy_efi
>
>

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi



More information about the Diy_efi mailing list