[Diy_efi] Venturi effect crankcase breather

Wed Jul 9 04:14:52 GMT 2003

--===============61015433775470973==
Content-Type: multipart/alternative;
	boundary="part1_13.1f659347.2c3cee18_boundary"

--part1_13.1f659347.2c3cee18_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

In a message dated 7/8/2003 11:55:19 PM Eastern Daylight Time, 
espresso_doppio at yahoo.com writes:

> .  He said the primary
> advantages from such a setup were a decrease in
> aeration (foaming) of the oil

if you reduce pressure the boiling and aeration points go down. IE the less 
pressure there is the easier it is for oil to both foam evaporate and boil. 

--part1_13.1f659347.2c3cee18_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: quoted-printable

<HTML>In a message dated 7/8/20=
03 11:55:19 PM Eastern Daylight Time, espresso_doppio at yahoo.com writes: 
 
 
<BLOCKQUOTE TYPE=3DCITE style=3D"BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT=
: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">.&nbsp; He said the primary 
advantages from such a setup were a decrease in 
aeration (foaming) of the oil</BLOCKQUOTE> 
 
if you reduce pressure the boiling and aeration points go down. IE the less=20=
pressure there is the easier it is for oil to both foam evaporate and boil.=20=
</HTML>

--part1_13.1f659347.2c3cee18_boundary--

--===============61015433775470973==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi

--===============61015433775470973==--