[Diy_efi] peak-and-hold injector driver ic's

[Djfreggens at aol.com]

my advice would be to stop worrying about current limitng and just overbuild 
the circut. if you have a peak load of say 1.1amps per injector and are 
firing one injector just go ahead and build the circut with a 4amp driver. 
the injector wont overheat. what the issue is is with driving the gate. if 
your using an oem ecm to drive the gate then just forget about current 
limitng. no real point to it. 

_______________________________________________
Diy_efi mailing list
Diy_efi at diy-efi.org
http://www.diy-efi.org/mailman/listinfo/diy_efi