[Diy_efi] Looking for a surge tank with 255 lph in-tank pump

[clair.davis at charter.net]

Like this one?
http://www.holley.com/HiOctn/ProdLine/Products/FMS/FMSFP/12-923.html
I'm working on making a separate tank with lift pump to feed the tank, and
then have the tank gravity feed the pressure pump.  Still haven't sorted it
all out yet, but getting there.  Until I get it all done, I'm just going to
keep the tank over half full on the autocross course...

Clair
FTWTX


----- Original Message ----- 
From: "Pete Paraska (REMOVETHIS1ST)" <pparaska at comcast.net>
To: <diy_efi at diy-efi.org>
Sent: Thursday, April 15, 2004 3:00 PM
Subject: [Diy_efi] Looking for a surge tank with 255 lph in-tank pump


> The engine will be in the 500+hp range, so I don't think the VW part
discussed
> in the past will work.
>
> What I'd like to have is a surge tank that includes a replaceable 255lph
in-tank
> pump (like the one the 85-97 Ford Mustang guys use (ie, Walbro GCA759).
> The tank would hold probably 1/2 a liter or more of fuel, with the pump
installed.
>
> Any leads?  I've scoured the search engines, the typical diy-efi vendors,
etc., and
> no joy.  I will end up having one welded up if I can't find one.  Wish I
had a TIG
> setup and knew how to use it!
>
>
>
> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
- - - - - - - - - - - - - - - - - - - - - - - - -
> Pete Paraska  (pparaska "at" comcast.net)   IZCC#15
> 73 240Z V8 - http://alteredz.com
> See http://HybridZ.org for Datsun Z car drivetrain/susp/brake/chassis/body
mods
>
> _______________________________________________
> diy_efi mailing list
> diy_efi at diy-efi.org
> http://lists.diy-efi.org/mailman/listinfo/diy_efi
>

_______________________________________________
diy_efi mailing list
diy_efi at diy-efi.org
http://lists.diy-efi.org/mailman/listinfo/diy_efi